Industrial Transformers

We provide High Tension Transformers, which is sourced from renowned manufacturers. Made from quality raw material, this high tension transformer has upto 11 k.v load bearing capacity. Our range is available in varied specification and acclaimed for long functional life.

 

Features:

 

• Energy efficient
• Precision functioning
• Long service life

 

Types of transformer:

 

• Resin Cast Ring or Rectangular Type
• Resin Cast Bar Primary with Embedded Bar
• Resin Cast Wound Primary (Termination on Stud/Bar).

 

Specifications:

 

• Voltage: 3.3/6.6/11Kv
• Primary Current: 10A to 2000A
• Secondary Current: 1A, 5A
• Insulation Level: 30 KV
• Short Time Current: Upto 26.2 KA for 1 second
• Class of Insulation: F
• Double Ratio - Triple Core
• Burden: Class of Accuracy
• Core 1 (Metering): 15 VA : 0.5
• Core 2 (Protection): 15 VA : 5P , 10P
• Accuracy Limit , Factor 5, 10,15,20
• Core 3 (PS Class): 15 VA: PS (Knee Point Voltage is required)

Our Low Tension Transformers is developed from copper enameled wire wound CRGO silicon steel cores & brass terminals for connection. Its outer body is made of virgin grade ABS plastic with various slots for bus bar mounting ranging from bus bar size 30 mm × 10 mm to 100 mm × 10 mm. Procured from trustable vendors; the transformer is widely catered to domestic and international client. 

 

Features:

 

• Precision functioning
• Long service life
• Energy efficient

We export Ultra Isolation Transformer that is procured from reliable vendors. Our advanced technology based transformer is widely used in power supply and electrical appliance. These transformers are impregnated under vacuum pressure up to insulation and class F or H that ensures reliability and long functional life.

 

Features:

 

• High level of isolation
• High quality neutral-ground bond
• High level of common-mode noise rejection
• Conversion from Delta to Wye or the other way around
• Easy to change voltage taps
• Custom design for specific system

 

Applications Area:

 

• Integrated in power conditioner at input or output
• Any system requires isolation and shielding.

We offer conventional type Distribution Transformers which is available in three phases with 50Hz supply frequency. The copper winding, double wound, class insulation, self-cooled, oil immersed, ONAN (cooling), indoor, outdoor type designed transformer is sourced from well recognized manufacturers.  Available in different technical specification, our range undergoes thorough quality test and ensure that they are at par with IS 2026.

 

Features:

 

• Better cooling
• Low noise level
• Better impulse
• Withstand short circuit
• Long functional life

 

Technical specifications:

 

• Product Range: 63 KVA TO 3000 KVA
• Rated Voltage: 11KV/0.433 KV

 

The standard fittings available with us are as follows:

 

• Rating and diagram plate
• Earthing terminal -2 nos
• Lifting Lugs
• Oil level Indicator
• Drain - cum - bottom filter valve with plug
• Oil filling hole with pluge on conservator
• Oil conservator with oil drain plug
• Air release plug
• Silica-gel air breather
• Bi-directional flat roller
• HV terminals - outdoor bushinges
• LV terminals - outdoor bushinges
• Radiators
• Filter valve with plug
• Thermometer pocket
• External temperature indicator
• Externally operated off circuit tap changing switch
• Explosion vent
• Sampling valve (for 2000 KVA trf.) Testing
• Measurement of winding resistance
• Measurement of voltage ratio and check of voltage vector relationship
• Measurement of insulation resistance
• Dielectric Test
• Measurement of no-load losses and no-load current
• Measurement of impedance voltage / short-circuit
• Impedance (pronciple tapping) and load loss
• Short circuit test
• Temperature rise test
• Measurement of acoustic noise level
• Double voltage & double frequency test
• Air pressure test on tanks for checking of leakage

We supply a wide range of HT/LT transformers, which conform to international quality standards. Our transformers meet the requirements of industrial, commercial and co-generation utility. We have transformers with a variety of terminations that meet the requirements for new installations as well as replacements.

We supply Automatic Voltage Controllers that is available in a capacity of 400 volts (three phase) and 230 volts (single phase). It is specifically used to protect the electrical and electronic equipment that are effected by the voltage fluctuation. Soured from leading manufacturers, our range finds usage in

General Laboratory Equipment, C. N. C. Machines, Escalators and Elevators and Air-Conditioning Plants

 

Features:

 

• Reduction in breakdown of the electrical equipment
• Energy saving 5 % to 10 % possible
• Improvement in power factor
• Reduction in MDI
• 100% depreciation as per income tax Act
• Overloading protection
• Over and under voltage protection

 

Some of the secondary equipment that is offered with our range comprises indicating & measuring equipment:

 

• Volt meter analogs / digital type, indicating input and ouput volts.
• Ammeter analogs/digital type, indicating input & output current.
• Mode switch for manual or automatic

 

Specification:

 

Mode selection

 

• Out put volt select-ability level switch
• Senscetibity level select-ability switch
• MCB Box provided for control panel

 

Our range is available in following models:

 

• Single Phase - 3KVA to 30 KVA
• Three Phase - 20 KVA to 5000 KVA
• Types - Balance Type & unbalance type

 

Applications Area:

 

• Offset Printing Machines
• Air-Conditioning Plants
• General Laboratory Equipment
• Signaling, Radars, Telecommunications
• Motors
• Domestic Load
• Textile Industries
• C. N. C. Machines
• Medical Equipments
• Escalators and Elevators
• Industrial & Lighting Loads
• Hotels
• Cement Plants
• Pharmaceutical Industries
• Oil Industrial
• Earth fault protection